Equipped with its native Hyper-Reflector, the 600d Pro can output 8,500 lux at 3 meters (10 feet). With the F10 Fresnel modifier, the combination can reach an illuminance of 29,300 lux at 3 meters in 15° spot. With a maximum power draw of 720W, the 600d Pro is on par with industry-standard HMI lights.
The 600d Pro is weatherproof (dust and water resistant), so it is built to withstand any shooting environment. When it comes to features Aputure has left no stone unturned with the inclusion of special effects such as paparazzi, fireworks, lightning, faulty bulb, TV, pulsing, strobe, and explosion. Aputure has also generously provided a rolling case for storage and transport.
M8
Lens-less MAX Technology: Easy to use
Light output comparable to 1,200 W fixture
Smallest lamphead with MAX Technology reflector
Highly mobile for a wide range of uses
Focusable between 15° and 60°
Cross-Cooling allows safe operation even at 90° tilt
Uses existing 230 & 245 mm accessories from ARRI True Blue D12 and from Chimera
Compensation for Cable Losses (CCL)
Uses existing 575 to 1,800 W cables with international connector
Suitable for high frame rate images
IP Rating IP23
Tilt locks to hold heavy accessories stable
M18
Lens-less MAX Technology: Easy to use
New 1,800 W lamp
Virtually the same size as a 1,200 W lamphead but more than 70 % brighter
Runs from most domestic sockets world-wide
Uses existing 575/1,200/1,800 W cables
Can also be used with 1,200 W lamps and ballasts
Cross Cooling allows safe operation at any tilt angle
IP Rating IP23
True Blue tilt lock holds even heavy Chimeras
Easy maintenance
M40
Lens-less MAX Technology: Easy to use
Around 30 % brighter than AS 40
Compensation for Cable Losses (CCL)
Tubular steel yoke
Two disk brakes with steel handles
Cross-Cooling allows safe operation at extreme tilt angles
Suitable for high frame rate images
IP Rating IP23
M90
Lens-less MAX Technology
Light output matches a 12 kW PAR (with lens)
As small and lightweight as a 6 kW PAR
Can also be used with 6,000 W (120 V nominal) lamps and ballasts
Tilt locks on both sides hold any heavy accessories